[Engraving knife usage] Introduction and application of nuclear carving tool

The tool is very important in nuclear carving. If the worker wants to do his best, he must first sharpen his tools. The tool is the most direct assistant and communication bridge for the sculptor to create. The knife cuts the block surface with the delicate and unique subtraction carving art technique. The dots, lines, and planes are organically arranged and combined to portray historical figures such as boats, buddhists, Confucians, and Taoists. The micro-cutters used are extremely complex, and the carving techniques using these knives are even more unique. The research of nuclear carving cutters is what every nuclear carving art worker strives for. Zhoushan standard olive core carving knife has 12 sets: one sharp knife, six semicircular knives, and five flat push knives. In addition, modern nuclear carving auxiliary tools include files and electric drills.

Sharp knife and usage: The blade is triangular, because its front face is on the left and right sides, and the sharp point is on the middle corner. It is mainly used for carving hair and decorative line patterns, and is also a tool commonly used in woodblock art and woodcut art platemaking. During operation, the knife tip is pushed on the wooden board, and the wood chips are spit out from the triangular groove. Come. The function of the sharp knife is basically to highlight the layering of the work, such as the distinction between clothes and meat, and to open the face of the character, the sharp knife is also needed to open the eyes.

Semi-circular knife and its usage: The cutting edge is arc-shaped, which is mostly used in round and round dents. It is also very useful in carving traditional flowers. It is relatively labor-saving to handle the round knife horizontally, and it can adapt to large fluctuations and small changes. Moreover, the line of the round knife is uncertain, it is flexible to use and easy to explore. According to different uses, the model of round knife should be different, the size range is basically 6 kinds between 5 cm-0.5 cm. The two corners of the blade of the round carved figure should be polished off, and it will be rounded. Otherwise, when carving clothes or other dents, not only will it not be pushed, but also the sides of the dent will be damaged. If you want to emboss, you should keep the two corners of the knife edge, and use the function of its corner tip to carve the corner of the ground, so it should be equipped with two kinds. There is a difference between the positive and negative round knives. The one with the inclined plane in the groove and the straight back of the knife is the front round knives. It eats the knife deeper and is most suitable for round carving, especially during the blanking and digging stages. The inclined surface is on the back of the knife, and the straight one in the groove is a round knife with a reverse mouth. It is more wood-deep and can be used to walk or pick the ground gently. It is more useful in relief. The shape of the round knife can also be bent into an iron rod according to the needs, so as to reach into the deeper part to dig a hole. The semi-circular knife is basically used to emphasize the expression of the concave and convex parts of the work, such as the facial muscles of the character and the folds of the clothes.

Push knife (also known as flat knife) and usage: the cutting edge is straight, mainly used for cutting the unevenness of the flat surface of the shovel, making it smooth and seamless. Larger models can also be used to chisel large, blocky faces, which can be applied effectively, such as the brushstroke effect of painting, which looks strong, vivid and natural. The sharp angle of the flat knife can cut the line, when the two knives intersect can remove the blade foot or the engraved pattern. Push knife is basically divided into large, medium and small. The push knife is mainly used to repair the bottom. For example, where the wire opening and the scraper are difficult to enter, the push knife is often used in thin art.

The carving technique of nuclear carving is different from other carving types, it belongs to the category of micro carving. Especially when engraving more characters or cumbersome landscape characters on a nucleus, the head of the character is sometimes as small as the size of a millet grain, but also has all the five features, different looks, with a certain art skills, the knife technique is the decision The key to success. The core carving is not only a small core, but also a small knife. Some are called "knives", but they are actually just a needle. However, even this needle has a sharp angle and a reclining angle. There are also sharp-edged blades. To have good eyesight, it is necessary to accurately distinguish the direction of the blade at any time, so as to achieve the goal of "whatever comes to mind".

Diameter 200mm Test Sieve

Diameter 200mm Test Sieve,Short Test Sieve,Height 25mm Test Sieve,SS304 Diameter Sieve

Xinxiang Xin Ming De Machinery Co., Ltd. , https://www.xmdsieve.com